User manual

Printing enlargements or reductions
1 1. Make sure the width of the loaded roll is displayed in the B Roll W idth list-in this case, ISO
A2/A3 (420.0mm) .
Note
• If the width of the roll loaded in the printer is not shown in B Roll W idth , click L Printer Information
on the Main pane to update the printer information.
12. Make sure the C Page Size setting matches the original size as selected in C Paper Size in the
Page Attributes dialog box-in this case, ISO A4 .
13. Select the D Enlarged/Reduced Printing check box.
14. Click G Scaling and enter “120” .
Note
• Y ou can specify enlargement that exceeds the paper size, but in this case, the portion of f the edge of
the paper will not be printed.
• If the original size after enlargement or reduction is smaller than the paper size, the original is printed
in the upper-left corner . In this case, you can center originals by selecting the J Print Centered
check box.
15. Conrm the print settings, and then click M Print to start printing.
Note
• For tips on conrming print settings, see “Conrming Print Settings (Mac OS X)”. (→P .457)
218 Enhanced Printing Options