User manual

Network Setting
When using an IPv6 IP address
1. Start the web browser and enter the following URL in the Location (or Address ) box to display
the RemoteUI page.
http:// “printer IP address or name” /
Example: http://xxx.xxx.xxx.xxx/
2. Select Administrator Mode and click Logon .
3. If a password has been set on the printer , enter the password.
4. Click Network in the Device Manager menu at left to display the Network page.
5. Click Edit in the upper-right corner of the TCP/IPv6 group to display the Edit TCP/IP Protocol
Settings page.
6. Refer to the TCP/IP Settings Items table to complete the settings.
TCP/IP Settings Items
Item Details
Default Setting
Use IPv6 Activate to enable IPv6. Of f
Use a stateful address Activate when using a DHCP server to
acquire the IP address.
Of f
Use a stateless address Activate when using an IPv6-compatible
router to acquire the IP address.
On
Use a manual address Activate when conguring the IP
address manually .
Of f
IP Address Enter the printer ’ s IP address. blank
Prex Length Enter the IP address prex length. blank
Default Router
Address
Enter the default router address. blank
Prex Length Enter the prex length of the default
router address.
blank
Primary DNS Server Address Specify the IP address of the primary
DNS server .
blank
Secondary DNS Server Address Specify the IP address of the secondary
DNS server .
blank
Use the same host name and
domain name as IPv4
Activate when using the same DNS host
and domain names as for IPv4.
Of f
DNS Host Name Specify the printer host name, up to
63 characters (1-4 characters). Use
single-byte letters, numbers, and “-”
(hyphens). Do not use numbers or “-”
for the rst character or “-” for the last
character .
NB-18GBip6xxxxxx
DNS Domain
Name
Specify the printer domain name, up
to 63 characters. Use single-byte
letters, numbers, “-” (hyphens), and “.”
(periods). Do not use numbers, “-” , or
“.” for the rst character , or “-” or “.” for
the last character .
blank
572 Network Setting