User manual

Messages regarding paper
The paper is too small.
Replace paper with A4/L TR (vertical) or larger
Cause Corrective Action
Replace the paper with paper of A4/Letter (vertical)
size or larger as follows.
1. Press ▲ or ▼ to select Change Paper , press the
OK button, and remove the paper .
( → P .144)
2. Switch to paper A4/Letter (vertical) or larger .
( → P .81)
The printer will resume printing.
The loaded paper is too small.
Press ▲ or ▼ to select Stop Printing , and then
press the OK button.
Replace roll with 10 in. wide or larger roll.
Cause Corrective Action
Replace the roll with a roll 10 inches in width or larger
as follows.
1. Press ▲ or ▼ to select Change Paper , and then
press the OK button.
( → P .1 16)
( → P .1 18)
2. Replace the roll with a roll 10 inches wide or larger .
( → P .103)
( → P .106)
The printer will resume printing.
The loaded paper is too small.
Press ▲ or ▼ to select Stop Printing , and then
press the OK button.
Remove paper and check pap. size
Cause Corrective Action
A sheet has come out of the printer during printing.
1. Press the Release Lever back and remove the
paper .
2. Reload the sheet, aligning it with the guide on the
right.
3. Pull the Release Lever forward.
4. If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
( → P .136)
Error Message 691