User manual

Table Of Contents

Control Panel

Setting Item Description, Instructions

Keep Paper Size Choose Off to give priority to margin settings. The

larger value is used if the margin specied in the

printer driver does not match the margin in the printer

T rimEdge Reload Specify whether to trim the leading edge of the

currently retracted roll when the roll is advanced. Cut

the edge if you are concerned about any marks left

on the roll when the roll is left in the retracted position.

Specify On to have rolls cut when printing begins after

Sleep mode or when the power is restored. Selecting

Automatic will trim the edge when the roll has been

in the retracted position for two days or more.

Rep.P .head Print Choose On to have the printer automatically execute

the Advanced Adj. operations after you replace the

Printhead .

( → P .604)

Nozzle Check In Frequency , specify the timing for automatic

checks of nozzle clogging. Choose Standard to have

the printer adjust the timing for checks based on the

frequency of nozzle use. Choose 1 page to check

once per page.

Select W arning > On to display warnings if the

nozzles clog during printing.

Use RemoteUI Choosing Off prohibits access from RemoteUI.

Settings can only be congured from the control

panel.

System

Setup

Reset PaprSetngs Restores settings that you have changed with Media

Conguration T ool to the default values.

Prep.MovePrinter Select this option when transferring the printer to

another location. Follow the instructions displayed to

complete the required procedure.

( → P .651)

Not displayed during a warning message that the

remaining Maintenance Cartridge capacity is low .

Admin.

Change Password By setting a password, you can restrict menu display

and conguration as follows. Y ou can input between

0 and 9999999.

• V iewing and conguration by administrators only

IPv4 Settings

Change Password

Init.Admin.Pswd

58 Printer Parts