imagePROGRAF Direct Print & Share Guide imagePROGRAF Direct Print & Share Guide Ver. 1.0 Canon Inc.
1. Features of imagePROGRAF Direct Print & Share The features of imagePROGRAF Direct Print & Share are as follows. - Note that "imagePROGRAF Direct Print & Share" is referred to as "Direct Print & Share" in this manual. 1. You can print your PDF documents and drawings or JPEG and TIFF images directly, without opening each application. - Encrypted PDF are not supported. 2. You can confirm the print layout by using the preview. Also, you can make print settings without opening up driver properties. 3.
2. INSTALLATION PROCEDURE The procedure for installing Direct Print & Share is as follows. 1. Unpack the downloaded file. 2. Run ipfdps32_1.0.0_setup.exe in 32-bit Windows systems or ipfdps64_1.0.0_setup.exe in 64-bit Windows systems. 3. The installer starts. Click the Next button. 4. The License Agreement is displayed. Select I accept the terms in the license agreement and then click the Next button.
5. The Destination Folder is displayed. Specify the installation destination and click the Next button. 6. Click the Install button.
The installation begins. 7. Click the Finish button. This completes the installation of Direct Print & Share.
3. Printing 3.1 REGISTERING THE PRINTERS TO USE Printers to be used in Direct Print & Share must be registered in the Printer pull-down menu. To add a printer to the Printer pull-down menu, follow these steps. 1. Click the button in the main window. 2. The Printer to use dialog box is displayed. Click the Add button.
3. The Add printer dialog box is displayed. Select the printer you want to add from Installed printers and click the OK button. - The printer drivers installed in your computer will be displayed in Installed printers. If you want to add a printer to Installed printers, install the desired printer's printer drivers on the computer you are using. 4. Make sure that the printer you selected in the Printer to use dialog box has been added, and then click the OK button.
The printer will be added to the Printer pull-down menu. 3.2 Printing 1. Click the Add button in the main window. 2. Select the file you want to print and click the Open button.
The file is added to the Registered file list. 3. Select the file you want to print in the Registered file list. A preview of that file is displayed in the preview area. By selecting a Layout in the Preview, you can preview what the file layout will look like on paper and page size, paper size, output resolution, etc. will be displayed in Print information.
4. Configure settings such as the paper source and print quality as needed in the printer settings area on the right side of the main window. 5. Turn on the Print check boxes for the files you want to print in the Registered file list of the main window. Enter the number of copies of each file to print and click the Print button. Printing begins. 4. Using the Cloud Storage 4.
2. The Cloud service integration dialog box is displayed. Click the Login button.
3. The Cloud login dialog box is displayed. Enter your account login ID and password for cloud service that is displayed in Cloud storage, and then click the OK button. Once you have logged in, the Login button changes to the Logout button and your login ID is displayed next to the button.
4.2 Upload files to cloud storage 1. If the files you want to upload to cloud storage are displayed in Registered file in the Cloud service integration dialog box, proceed to step 4. If they are not displayed, click the Close button to close the Cloud service integration dialog box. 2. Click the Add button in the main window and add the files you want to upload to the cloud storage to the Registered file list. 3. Click the Cloud service integration button to open the Cloud service integration dialog box.
6. If the Share settings when uploading check box is turned on, the Share settings dialog box will be displayed. Register users with whom you want to share file uploads to the Share user list. If you want to add a user, click the Add button.
7. The Add user dialog box will be displayed. Enter the Google account e-mail address for the user with whom you want to share files. 8. The added e-mail addresses will be displayed in the Share user list of the Share settings dialog box. Click the OK button. The Upload dialog box will be displayed and your uploads will begin. When uploading completes, e-mail notification will be sent to set users. 4.3 Download files from cloud storage 1.
2. Click the Download button. The Download dialog box will be displayed and your downloads will begin. When downloading completes, the files you downloaded will be added to the Registered file list. Downloaded files can be printed from the main window. 5. Print from AutoCAD If you install Direct Print & Share on a computer that has Autodesk's CAD software AutoCAD installed on it, a Direct Print & Share plug-in will be added to AutoCAD.
2. Click Print and Preview from either AutoCAD's ribbon menu or by right clicking and selecting it from the displayed menu. 3. The Direct Print & Share will start after the PDF files that reflect the layout of open drawings are generated. - If you want to change the layout of a PDF file, change the layout of the drawing in AutoCAD and then click Print and Preview again. 4.
