User's Manual

Manual (when using media that cannot be cut with the Cutter Unit )
1
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to
select the Paper tab ( ).
Note
•
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the
OK button. The Paper Menu is displayed.
3 Press ▲ or ▼ to select Paper Details, and then press the OK button.
4 Press ▲ or ▼ to select the type of paper, and then press the OK button.
5 Press ▲ or ▼ to select Cutting Mode, and then press the OK button.
6 Press ▲ or ▼ to select Manual, and then press the OK button.
7 Starts printing.
The printer stops advancing the paper after printing.
8
Press the Feed button.
Roll paper is fed to the specified cut position and then automati-
cally stopped.
iPF770 Specifying the Cutting Method for Rolls
User's Guide
Handling and Use of Paper Handling rolls
335