User's Manual

Setting Item Description, Instructions
GL2
Settings
Line &
Pen
Manag-
er
Smoothing
• If you choose Smooth
ThickenFineLines Select On to print fine lines more distinctly.
AdjustFaintLines If fine lines are printed in colors that do not match the col-
ors of other shapes, selecting Off may help produce the
expected results. However, lines in some colors may ap-
pear broken.
Proces-
singOp-
tion
Warning Select On to have any GL2-related warnings displayed.
PageSizeProcess1 Set the position of the margin relative to the image range.
Choose Off to set the margin outside the image range.
Although the image will not be missing, you should print
on paper larger than the size of the image range plus the
margins.
Choose On to set the margin inside the image range.
The image may be missing depending on the layout.
PageSizeProcess2 Change the method of handling image range information.
Normally, leave the setting Off.
Try On if the image is missing or you get a blank paper.
GL2 Set Print Print GL2 settings information.
Inter-
face
Setup
EOP Timer Specify the timeout period before cancellation of print jobs
that cannot be received by the printer.
TCP/IP IPv4 IPv4 Mode Choose whether the printer IP address is configured auto-
matically or a static IP address is entered manually.
Proto-
col
DHCP Specify the protocol used to configure the IP address au-
tomatically.
BOOTP
RARP
IPv4
Settings
IP Address Specify the printer network information when using a stat-
ic IP address.
Enter the IP address assigned to the printer, as well as
the network subnet mask and default gateway.
The value that was automatically configured is displayed if
you have set IPv4 Mode to Automatic.
Subnet Mask
Default G/W
DNS
Settings
DNS Dync update Specify whether DNS server registration is updated auto-
matically.
Pri. DNS SrvAddr Specify the DNS server address.
Sec. DNS SrvAddr
DNS Host Name Specify the DNS host name.
DNS Domain Name Specify the DNS domain name.
IPv6 IPv6 Support Specify whether to connect via IPv6.
IPv6 StlessAddrs Specify whether a IPv6 stateless address is used.
DHCPv6 Specify whether DHCPv6 settings are used.
DNS
Settings
DNS
Dync
update
Statefull
Addr
Specify whether DNS server registration is updated auto-
matically.
State-
less
Addr
Pri. DNS SrvAddr Specify the DNS server address.
Menu Settings iPF770
User's Guide
Control Panel Printer Menu
422