User's Manual

9
Pull the Printhead Fixer Cover down toward the front to
lock the Printhead in place.
10
Push the Printhead Fixer Lever toward the back of the
printer until it clicks.
11
Close the Top Cover.
Ink now fills the system. It takes about seven minutes to
complete.
Important
•
While ink is being filled, definitely do not remove the Ink Tank or Maintenance Cartridge. Ink may leak
out.
Note
• After Printhead has been replaced and filled with ink, Head Posi. Adj. ( Auto(Advanced) ) is performed if
you have selected Rep.P.head Print > On in the Control Panel menu. (See "Menu Settings.") ➔P.416
In this case, follow the instructions on the Display Screen for Printhead adjustment.
If Rep.P.head Print is Off, perform Head Posi. Adj. ( Auto(Advanced) ) yourself.
(See "Automatic Ad-
justment to Straighten Lines and Colors.")
➔P.480
Replacing the Printhead iPF770
User's Guide
Maintenance and Consumables Printheads
508