User's Manual

Caution
• The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself
poses a risk of injury or bending the Stand.
• When assembling the Stand, lock all four of the casters. Attempting to move the stand when the casters
are not locked poses a risk of injury or damage to the location site.
•
Before moving the assembled stand, lift the support
rod to the position shown (a) and unlock all four cas-
ters. Moving the stand with the support rod lowered or
the casters locked may cause injury or damage the
area of installation or basket cloth.
OFF
a
Note
• The Stand that can be used with this printer is Printer Stand ST-34 and Printer Stand ST-33.
• The Stand is described in the illustration of Printer Stand ST-34. Note that the illustrations may look differ-
ent from the appearance of your printer in some cases.
Install the printer
1
Mount the printer on the assembled Stand and tighten the
screws firmly.
Caution
•
Moving the printer requires at least three people. Be careful to avoid back strain and other injuries.
•
When moving the printer, firmly grasp the Carrying
Handles. The printer may be unsteady if you hold it at
other positions, which poses a risk of injury from drop-
ping the printer.
• When placing the printer on the Stand, lock all four of the casters of the Stand. Attempting to place the
printer on the Stand while the casters are not locked poses a risk of injury.
Reinstalling the Printer iPF770
User's Guide
Maintenance and Consumables Other Maintenance
522