User's Manual

In the AMedia Type list, select the type of paper that is loaded. In this case, click Plain Paper.

Select the printing application in the E Print Target list.

Click the Page Setup tab to display the Page Setup

sheet.

Select and click a roll paper in the LPaper Source list.

In the APage Size list, click the size of the original as specified in the application. In this case, click ISO

A4 or Letter (8.5"x11").

Select the CEnlarged/Reduced Printing check box.

Note

•

If the CEnlarged/Reduced Printing check box is

not displayed on the Page Setup sheet, clear the

B Borderless Printing check box.

Click EFit Roll Paper Width.

Note

•

After you click EFit Roll Paper Width, the Information dialog box is displayed. Select the width of the

loaded roll in the Roll Paper Width list and click OK.

•

Make sure the roll paper width you specify matches the width of the loaded roll.

Confirm the print settings and print as desired.

Note

•

For tips on confirming print settings, see "Confirming Print Settings ." ➔P.143

Resizing Originals to Fit the Roll Width (Mac OS)

This topic describes how to enlarge originals before printing to match the roll width, based on the following exam-

ple.

•

Document: Any Type

•

Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])

•

Paper: Roll paper

iPF770

Resizing Originals to Fit the Roll Width (Mac OS)

User's Guide

Enhanced Printing Options Printing enlargements or reductions