User's Manual
7
Click the Page Setup tab to display the Page Setup
sheet.
8
In the APage Size list, click the size of the original as specified in the source application. In this case, click
10"x12".
9
Select and click a roll paper in the LPaper Source list.
10
Select the BBorderless Printing check box to dis-
play the Information dialog box.
11
Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12
Click OK to close the Information dialog box.
13
In CBorderless Printing Method, click F Print Image with Actual Size.
14
Confirm the print settings and print as desired.
Note
•
For tips on confirming print settings, see "Confirming Print Settings ." ➔P.143
Borderless Printing at Actual Size (Mac OS)
Borderless Printing at Actual Size (Mac OS)
This topic describes how to print borderlessly at actual size based on the following example.
Important
•
When borderless printing is used, the edge of the paper is cut during printing. Thus, ink density may be uneven at
the edges. If you require higher image quality, select No from the Automatic Cutting list in the Paper Detailed
Settings dialog box. In this case, the paper can be printed without borders on the left and right sides only. Once
printed and cut, please cut the upper and lower bands with scissors.
•
Document: Any type
•
Page size: 10 × 12 inches (254.0×304.8 mm)–Borderless
Borderless Printing at Actual Size (Mac OS)
iPF770
User's Guide
Enhanced Printing Options Printing at full size
74