User's Manual
4
Make sure the Main sheet is displayed.
5
In the A Media Type list, select the type of paper that is loaded.
6
After confirming that D Easy Settings is selected, select from the E Print Target list.
7
Click the Page Setup tab to display the Page Setup
sheet.
8
Click O Size Options to display the Paper Size Options dialog box.
9
Enter a desired paper name in Custom Paper Size Name. 430 mm Square is used in this example.
10
Select mm in Units.
11
Enter 430 (16.9 in) in both Width and Height.
Note
•
If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either Width
or Height, the other value will be automatically applied based on the original aspect ratio.
12
Click Add to register 430 mm Square.
13
Click OK to close the Paper Size Options dialog box.
14
Click Manual in the L Paper Source list.
15
In the A Page Size list, click the size you added,430 mm Square.
Printing on Non-Standard Paper Sizes (Windows)
iPF770
User's Guide
Enhanced Printing Options Printing banners or at other non-standard sizes
94