User's Manual
5
After confirming that D Easy Settings is selected, click Poster in the E Print Target list.
6
Click the Page Setup tab to display the Page Setup
sheet.
7
In the A Page Size list, click the size you registered, My Horizontal Banner.
8
Select the C Enlarged/Reduced Printing check box.
Note
•
If the C Enlarged/Reduced Printing check box is not
displayed on the Page Setup sheet, clear the B Bor-
derless Printing check box.
9
Select and click a roll paper in the L Paper Source list.
10
After you click E Fit Roll Paper Width, the Information dialog box is displayed.
11
Select the width of the loaded roll in the Roll Paper Width list. In this case, click 16-in. Roll (406.4mm), and
then click OK.
12
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.161
Printing Vertical or Horizontal Banners (Large-Format Printing; Windows)
iPF780
User's Guide
Enhanced Printing Options Printing banners or at other non-standard sizes
100