User's Manual
• G Paper Size
Available when D Fit Paper Size is selected.
Choose the size of the paper you will print on.
For details on available paper sizes, see "Paper Sizes."
➔P.360
Paper sizes compatible with borderless printing are shown in the list.
• C Enlarged/Reduced Printing
Choose from the following options when this setting is activated.
•
Resizing Originals to Match the Paper Size ➔ P.65
•
Resizing Originals to Fit the Roll Width ➔ P.67
•
Resizing Originals by Entering a Scaling Value ➔P.71
•
D Fit Paper Size
Scales the document image to match the paper size.
• E Fit Roll Paper Width
Scales the document image to match the roll width.
• F Scaling
Resizes the document image based on a specified scaling value. Enter a value in a range of 5–600.
• G Paper Size
Choose the size of the paper you will print on.
For details on available paper sizes, see "Paper Sizes." ➔ P.360
• H Orientation
Choose the printing orientation.
•
Making the Original Orientation Match the Paper Orientation ➔ P.148
• K Rotate Page 90 degrees (Conserve Paper)
Activate this setting to rotate the document image by 90 degrees before printing.
•
Conserving Roll Paper by Rotating Originals 90 Degrees ➔ P.135
• L Paper Source
Choose the feed source, as desired.
Options displayed in the list vary depending on the selection in Media Type on the Main sheet.
• M
Roll Paper Width
Choose the roll width.
For details on available roll widths, see "Paper Sizes." ➔ P.360
iPF780
Page Setup Sheet
User's Guide
Windows Software Printer Driver
179