User's Manual

Messages regarding paper
The roll is empty .
Lift the release lever and replace the roll.
Cause Corrective Action
The roll is empty . Follow these steps to replace the used roll with a new
roll of the same type and size.
1. Lift the Release Lever and remove the roll.
( → P .143)
( → P .145)
2. Load the new roll.
( → P .136)
( → P .139)
3. If no barcode was printed on the roll, specify the
type of paper .
( → P .134)
4. If no barcode was printed on the roll, specify the
paper length.
( → P .135)
5. If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
There is remaining roll paper , but because it could
not be advanced, it could not be detected.
Choose a higher level of Print Quality in the
Advanced Settings of the printer driver .
( → P .222)
Press OK.
Cause Corrective Action
The roll is empty . Follow these steps to replace the used roll with a new
roll of the same type and size.
1. Press the OK button and remove the roll.
( → P .143)
( → P .145)
2. Load the new roll.
( → P .136)
( → P .139)
3. If no barcode was printed on the roll, specify the
type of paper .
( → P .134)
4. If no barcode was printed on the roll, specify the
paper length.
( → P .135)
5. If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
Error Message 665