User's Manual

Other Messages
Other Messages
GARO Wxxxx (x represents a number)
Cause Corrective Action
T ry printing again, using the correct printer driver .There is a problem with the print job.
It is also possible to continue printing in this state.
However , you may not be able to obtain the desired
printing results.
ERROR Exxx-xxxx (x represents a letter or number)
Cause Corrective Action
An error requiring service may have occurred. W rite down the error code and message, turn of f the
printer , and contact your Canon dealer for assistance.
Hardware error . xxxxxxxx-xxxx (x represents a letter or
number)
Cause Corrective Action
The last portion of roll paper was used during a
print job. The paper was not advanced because the
trailing edge is taped to the roll.
T urn of f the printer and remove the roll from the
printer before restoring power .
Fastening tape or the Belt Stopper has not been
removed inside the T op Cover .
T urn of f the printer , open the T op Cover and remove
the tape or the Belt Stopper before restoring power .
An error requiring service may have occurred. T urn of f the printer and wait at least three seconds
before restoring the power .
If the message is displayed again, write down the
error code and message, turn of f the printer , and
contact your Canon dealer for assistance.
T op cover is open.
Cause Corrective Action
Open the T op Cover fully , remove any foreign objects,
and close the T op Cover again.
The printer has detected that the T op Cover is open.
If the error occurs again, close the T op Cover , turn of f
the printer , and wait a while before restoring power .
Error Message 683