iPF840 User's Guide Ver.1.00

Important
• When handling the roll, be careful not to soil the printing surface. This may affect the printing quality. We recom-
mend wearing clean cloth gloves when handling rolls to protect the printing surface.
• Cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it may cause feeding problems
and affect the printing quality. Be careful not to cut through any barcodes printed on the roll.
㧪OO
•
Align the edges of the paper on both ends of the roll. This may cause feeding problems.
Note
•
For details on supported sizes and types of roll paper, see Paper Sizes or the Paper Reference Guide. (See
"Paper Sizes.") ➔P.332 (See "Displaying the Paper Reference Guide.") ➔ P.335
• To view instructions as you attach the Roll Holder, press the Navigate button. (See "How to View Instructions With
Navigate.") ➔P.432
1
Lift the Holder Stopper lever (a) from the shaft side to un-
lock it. Holding the Holder Stopper at the position indicated
(b), remove it from the Roll Holder.
2
When using a 3-inch paper core, align the tips (a) of 3-Inch
Paper Core Attachment #1 with the holes (b) of the Roll
Holder and insert it firmly.
a
b
a
b
iPF840 Attaching the Roll Holder to Rolls
User's Guide
Handling and Use of Paper Handling rolls
343