iPF840 User's Guide Ver.1.00
3
Open the Top Cover and lift the Ejection Guide.
4
Holding the Roll Holder so that the side with the white gear
faces the side of the Roll Holder Slot with a white gear,
load the Roll Holder shaft (a) into the grooves (b) on both
ends of the Roll Holder Slot.
Caution
•
Be careful not to drop the roll and hurt yourself when loading it.
•
Be careful not to pinch your fingers between the Roll Holder shaft (a) and the guide grooves (b) when
loading rolls.
Note
•
For instructions on attaching the Roll Holder to rolls, see "Attaching the Roll Holder to Rolls." ➔ P.342
5
Using both hands, pull out the roll evenly on both ends and
insert it in the Paper Feed Slot (a). Advance the roll until
the buzzer sounds.
baba
a
a
Loading Rolls in the Printer
iPF840
User's Guide
Handling and Use of Paper Handling rolls
346