iPF840 User's Guide Ver.1.00

Note
• For details on types of paper to select, see the Paper Reference Guide. (See "Displaying the Paper
Reference Guide.") ➔P.335
• Adjusting the printhead alignment with the type of paper to be used in printing may enhance printing quali-
ty. (See "Automatic Adjustment to Straighten Lines and Colors.") ➔P.550
Loading rolls in the Roll 2 (Lower) holder
Caution
•
Do not detach the Roll Unit in the following cases.
• During printing
Vibration from removing the Roll Unit may affect the printing quality.
• If a sheet is loaded in the printer
The sheet may be ejected, and (rarely) it may be bent.
1
Press the Load button.
2 Press ▲ or ▼ to select Roll 2 (Lower), and then press the OK button.
Note
•
If any cut sheet has been fed, or roll paper that will not be used has been fed from Roll 2 (Lower), a
message is shown requesting you to remove it.
Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step.
• If roll paper is loaded in Roll 2 (Lower) but Roll 2 (Lower) is not selected as the paper source, a message
asking you whether or not to change paper is displayed.
Press ▲ or ▼ to select Load, and then press the OK button. Remove the paper and proceed to the next
step.
3
Holding the Roll Unit Lever (a), pull out the Roll Unit.
a
Loading Rolls in the Printer iPF840
User's Guide
Handling and Use of Paper Handling rolls
348