iPF840 User's Guide Ver.1.00
5
Press ▲ or ▼ to select Yes, and then press the OK button.
The roll is rewound.
Important
•
If you have selected ManageRemainRoll > On in
the Control Panel menu, a barcode is printed on
the leading edge of the roll.
Do not remove the roll before the barcode is prin-
ted. You will be unable to keep track of the amount
of roll paper left. (See "Keeping Track of the Amount of Roll Paper Left.") ➔P.358
6
Check that "No Paper Loaded" is displayed on the Display
Screen, and then grasp the Roll Unit Lever (a) and pull out
the Roll Unit.
7
Using both hands, rotate the Roll Holder in the direction of
the arrow to rewind the roll.
8
Holding the Roll Holder flange (a), remove the holder
from the Roll Holder Slot.
Note
•
For instructions on removing the Roll Holder from rolls, see "Removing the Roll Holder from
Rolls." ➔P.356
•
To load new paper in the printer at this point, see "Loading Rolls in the Printer." ➔ P.345
a
a
iPF840
Removing the Roll from the Printer
User's Guide
Handling and Use of Paper Handling rolls
355