iPF840 User's Guide Ver.1.00

Printer status and modes
The printer has the following status.
Standby The printer is ready to receive jobs sent from the computer. Jobs sent from the computer are printed
immediately.
Ready
Plain Paper
OK: Paper Menu
Plain Paper
Printing Paused Printing is paused on the printer. Any jobs sent from the computer are held without being printed.
Printing The printer is printing a print job. When a print job is received from the computer, printing starts after
the currently printing print job has printed.
The time left until printing is finished is indicated in the upper-right corner in the middle line of the
display (values exceeding 10 hours are not shown).
The job name and the information about the paper of the currently printing job appear at the bottom
line of the display.
Sleep The printer is in power-saving mode. The printer automatically enters Sleep mode to conserve power
when idle for a specific period (by default, five minutes), that is, if no print jobs are received or buttons
are pressed while all covers are closed.
You can specify the period before the printer enters Sleep mode in the Sleep Timer menu. (See
"Menu Settings.") P.445
After entering Sleep mode from Standby mode, the printer automatically recovers if print jobs are re-
ceived, and the jobs are printed.
Off The printer is not on.
If no operations are performed on the printer for the duration of the time set in Shut Down Timer after
entering Sleep mode, the printer automatically turns off. (See "Menu Settings.") P.445
Error The printer requires your attention. Any jobs sent from the computer cannot be processed. The tab
related to the error is displayed.
For information about the display in the case of multiple errors, see "Display Transitions in Error Sta-
tus."
OK
Replace ink tank.
No ink left.
C M Y
M
B
K
B
K
iPF840
Control Panel Display
User's Guide
Control Panel Operations and Display Screen
429