iPF840 User's Guide Ver.1.00

Item Details Default Setting
Secondary DNS Server Address Specify the IP address of the secondary DNS server. ::
Use the same host name and do-
main name as IPv4
Activate when using the same DNS host and domain names
as for IPv4.
Off
DNS Host Name Specify the printer host name, up to 63 characters (1–63
characters). Use single-byte letters, numbers, and - (hy-
phens). Do not use numbers or - for the first character or - for
the last character.
NB-18GBip6xxxxxx
DNS Domain Name Specify the printer domain name, up to 63 characters. Use
single-byte letters, numbers, - (hyphens), and . (periods). Do
not use numbers, -, or . for the first character, or - or . for the
last character.
blank
Perform dynamic updating of state-
ful addresses
Activate this setting to automatically register the stateful ad-
dress with the DNS server.
Off
Dynamically update the stateless
address
Activate this setting to automatically register the stateless ad-
dress with the DNS server.
Off
Dynamically update the manual ad-
dress
Activate this setting to automatically register the manual ad-
dress with the DNS server.
Off
6 Click OK to display the Network page.
Note
•
If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS servers
and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and DNS Domain
Name, respectively.
Configuring the Printer's TCP/IP Network Settings With RemoteUI iPF840
User's Guide
Network Setting Initial Settings
486