iPF840 User's Guide Ver.1.00
2
Open the Top Cover and lift the Ejection Guide.
3
Grasp the Belt, insert it between the Belt Stopper, and affix
the Belt Stopper with a hex screw at the position indicated.
Important
•
Here, the Belt Stopper is the one that was removed and stored after initial installation. Neglecting to
attach the Belt Stopper may damage the printer.
•
Do not touch the Linear Scale (a), Carriage Shaft (b),
or Ink Tube Stabilizer (c). Touching these parts may
damage them.
c
a
b
Preparing to Transfer the Printer
iPF840
User's Guide
Maintenance and Consumables Other Maintenance
598