iPF840 User's Guide Ver.1.00

Problems Regarding Paper
Problems Regarding Paper
Clearing Jammed Roll Paper .......................................................................................................................... 605
Clearing a Jammed Sheet .............................................................................................................................. 608
Troubleshooting When Paper Jams are not Found .......................................................................................... 610
Roll paper cannot be inserted into the Paper Feed Slot .................................................................................. 612
Cannot load sheets ........................................................................................................................................ 612
Paper is not cut neatly .................................................................................................................................... 612
Paper is not cut .............................................................................................................................................. 613
The size of clear film cannot be detected ........................................................................................................ 613
Clearing Jammed Roll Paper
Clearing Jammed Roll Paper
If roll paper jams, follow the steps below to remove jams.
Note
If you do not find any scraps or jams, see "Troubleshooting When Paper Jams are not Found." P.610
1
Turn the printer off. (See "Turning the Printer On and Off.") P.17
2
Open the Top Cover.
Note
If the leading edge of the roll jams in the carriage such as when the paper curls strongly, you may be able
to avoid paper jamming by setting the roll cutting method to Manual and setting the detection of paper
leading edge to Do not perform.
(See "Specifying the Cutting Method for Rolls.")
P.360
3
If the Carriage is out, move the Carriage out of the way,
away from the paper.
iPF840
Clearing Jammed Roll Paper
User's Guide
Troubleshooting Problems Regarding Paper
605