iPF840 User's Guide Ver.1.00

ManualsBrandsCanon Manualslarge format printersimagePROGRAF iPF840 MFP M40

621

622

623

624

625

626

627

628

629

630

Printed colors of lines are inaccurate during HP-GL/2 printing

Cause Corrective Action

AdjustFaintLines is On in the Con-

trol Panel menu.

Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expected

results. However, lines in some colors may appear broken.

HP-GL/2 jobs are printed 6 mm larger than specified

Cause Corrective Action

The page size of the HP-GL/2 print job, as created in the source application, is

incorrect.

In the Control Panel menu, set Oversize to Off.

(See "Menu Settings.") ➔P.445

HP-GL/2 jobs are printed at maximum size, even if a standard size is specified

Cause Corrective Action

The page size of the HP-GL/2 print job, as created in the

source application, is incorrect.

Set Detect img size to Command priority or Detected size in the

Control Panel menu.

(See "Menu Settings.") ➔P.445

Set Conserve Paper to On in the Control Panel menu.

(See "Menu Settings.") ➔P.445

HP-GL/2 printing takes a long time

Cause Corrective Action

Large print jobs with a lot of data take longer to print. Please wait a while until printing is finished.

A job was printed when Input Resolution in the Control

Panel menu was set to 600dpi.

In the Control Panel menu, set Input Resolution to 300dpi and print

again.

(See "Menu Settings.") ➔P.445

The printer stops when printing a HP-GL/2 job (the carriage stops moving)

Cause Corrective Action

The printer is analyzing the print job. Please wait a while until printing is finished.

A job was printed when Input Resolution in the Control

Panel menu was set to 600dpi.

In the Control Panel menu, set Input Resolution to 300dpi and print

again.

(See "Menu Settings.") ➔P.445

iPF840

Printed colors of lines are inaccurate during HP-GL/2 printing

User's Guide

Troubleshooting HP-GL/2 problems

629