iPF840 User's Guide Ver.1.00
Messages regarding paper
Messages regarding paper
MediaType Mismatch ...................................................................................................................................... 638
PaprTypeMismatch ......................................................................................................................................... 638
The paper is too small. ................................................................................................................................... 639
The paper is too small. ................................................................................................................................... 639
PaprWidth Mismatch ...................................................................................................................................... 639
Paper size not detected. ................................................................................................................................. 640
Insufficient paper for job ................................................................................................................................. 640
This paper cannot be used as size is not supported. ...................................................................................... 641
Cannot print as selected. Another roll is in use. .............................................................................................. 641
Roll printing is selected. .................................................................................................................................. 641
Roll printing is selected, but sheets are loaded. .............................................................................................. 641
Roll x is selected. (x is 1 (Upper) or 2 (Lower)) ................................................................................................. 641
Roll x is empty. (x is 1 (Upper) or 2 (Lower)) .....................................................................................................642
No Roll Unit. ................................................................................................................................................... 642
Sheet removed. .............................................................................................................................................. 643
Sheet printing is selected. ............................................................................................................................... 643
Regular printing is selected, but a roll is loaded. ............................................................................................. 643
Paper jam. ...................................................................................................................................................... 643
Roll x jam (x is 1 (Upper) or 2 (Lower)) ............................................................................................................. 644
Paper loaded askew. ...................................................................................................................................... 644
Paper cutting failed. ........................................................................................................................................ 644
End of paper feed. .......................................................................................................................................... 645
Rel lever is in wrong position. ......................................................................................................................... 645
Borderless printng not possible. ..................................................................................................................... 645
Paper position not suitable for borderless printing. ......................................................................................... 646
Roll feed unit error. ......................................................................................................................................... 646
The roll feed unit is loose. ............................................................................................................................... 646
MediaType Mismatch
MediaType Mismatch
Cause Corrective Action
You tried to print a test pattern for printer ad-
justment on several sheets, but sheets of dif-
ferent types of paper were used.
When printing a test pattern for adjustment, use sheets of the same type of paper,
in the required quantity. Replace the paper as follows and perform adjustment
again.
1.
Lift the Release Lever and stop printing.
2.
Replace the paper.
(See "Loading and Printing on Sheets.") ➔P.21
3.
Execute adjustment again from the control panel menu.
When Detect Mismatch in the Control Panel
menu is set to Warning, the type of paper loa-
ded does not match the type specified in the
printer driver.
You can continue to print, but note that this error may cause paper jams or prob-
lems in the printing results.
PaprTypeMismatch
PaprTypeMismatch
Cause Corrective Action
When Detect Mismatch in the Control Pan-
el menu is set to Pause, the type of paper
loaded does not match the type specified in
the printer driver.
Follow these steps to ensure the paper type matches on the printer and in the printer
driver.
1.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
2.
Change the paper type setting in the printer driver to the type loaded in the printer
and try printing again.
MediaType Mismatch
iPF840
User's Guide
Error Message Messages regarding paper
638