iPF840 User's Guide Ver.1.00

Paper position not suitable for borderless printing.

Cause Corrective Action

Because paper expands or con-

tracts depending on the environ-

ment of use, it may become nar-

rower or wider than the suppor-

ted width for borderless printing.

Press ▲ or ▼ to select Stop Printing, and then press the OK button.

Use each type of paper only where the recommended environmental conditions are met. For de-

tails on environmental conditions for various paper, see the Paper Reference Guide.

(See "Displaying the Paper Reference Guide.") ➔P.335

The paper is loaded askew. Press ▲ or ▼ to select Change Paper and straighten the paper so that the edges are between

the ink grooves for borderless printing.

Insert the roll firmly until it touches the flange of the Roll Holder.

(See "Attaching the Roll Holder to Rolls.") ➔P.342

Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing.

The document will be printed with a border.

Press ▲ or ▼ to select Stop Printing, and then press the OK button.

Roll feed unit error.

Cause Corrective Action

There is a problem with the

Roll Unit.

Turn off the printer and wait at least three seconds before restoring the power. If the message is dis-

played again, contact your Canon dealer for assistance.

The roll feed unit is loose.

Cause Corrective Action

The Roll Unit is detached from the printer. Push the Roll Unit firmly all the way in.

Paper position not suitable for borderless printing.

iPF840

User's Guide

Error Message Messages regarding paper

646