iPF840 User's Guide Ver.1.00

Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot print as specified. ............................................................................................................................... 649
Cannot adjust printhead. ................................................................................................................................ 650
Borderless printng not possible. Paper stretched or shrank. ........................................................................... 649
Before borderless printing, move the blue platen switch. ................................................................................ 649
Borderless printng not possible. ..................................................................................................................... 645
Blue platen switch is dirty. .............................................................................................................................. 649
Move the blue platen switch No.xx to the right. (xx represents a number) ....................................................... 649
Check printed document. ............................................................................................................................... 649
Cannot print as specified.
Cannot print as specified.
"Lift the release lever and replace paper with A4/LTR (vertical) or larger."
Cause Corrective Action
The loaded paper is too small. Switch to paper A4/Letter (vertical) or larger.
"Lift the release lever and replace roll with 10 in. wide or larger roll."
Cause Corrective Action
The loaded paper is too small. Load a roll 10 inches wide or larger.
Borderless printng not possible. Paper stretched or shrank.
Borderless printng not possible. Paper stretched or shrank.
Cause Corrective Action
The loaded roll has expanded or contracted due to environmen-
tal conditions, making it wider or narrower than the supported
width for borderless printing.
Press the OK button to stop printing.
Use each type of paper only where the recommended environ-
mental conditions are met. For details on environmental condi-
tions for various paper, see the Paper Reference Guide.
(See "Displaying the Paper Reference Guide.") ➔P.335
Before borderless printing, move the blue platen switch.
Before borderless printing, move the blue platen switch.
Cause Corrective Action
The blue Switch on the platen was set to the side oppo-
site ● when a borderless print job was received.
Before borderless printing, set the blue Switch on the platen to the ● side.
(See "Setting the Blue Switch on the Platen.") ➔P.621
Blue platen switch is dirty.
Blue platen switch is dirty.
Cause Corrective Action
The blue Switch on the platen is dirty. Open the Top Cover and clean the blue Switch on the platen.
(See "Cleaning Inside the Top Cover.") ➔ P.591
Move the blue platen switch No.xx to the right. (xx represents a number)
Move the blue platen switch No.xx to the right. (xx represents a number)
Cause Corrective Action
The printer has detected that the blue Switch on the platen nee-
ded in maintenance during printing is set away from the ● mark.
Set blue platen Switch of the indicated number toward the ● side.
(See "Setting the Blue Switch on the Platen.") ➔P.621
Check printed document.
Check printed document.
Cause Corrective Action
The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.
(See "Cleaning the Printhead.") ➔P.578
iPF840
Cannot print as specified.
User's Guide
Error Message Messages regarding printing or adjustment
649