User manual

Important

• Depending on your model, some settings may not appear.

Ink Usage

Selects and sets the upper limit on the amount of ink to use when printing on customer paper from

among several levels.

For details on setting the ink level, see "Setting Ink Level."

Important

• After setting the Calibration Target and ICC Profile sheets, changes to the ink usage on the

Advanced Paper Settings sheet will disable the settings on the Calibration Target and ICC

Profile sheets. In this case, set the Calibration Target and ICC Profile sheets again.

•

If you change the ink usage level, the type of black ink that will be used may change.

Paper Thickness (Head Height)

Sets the height of the printhead. Set this higher if the printhead is rubbing against the paper.

Auto

Automatically sets the height of the printhead to match the selected base paper depending on

the environment and printing mode.

Super Low/Low/Medium-low/Standard/Medium-high/High

You can specify six levels. Depending on your model, Super Low and Medium-low may not be

available.