User manual

• If you are using a PRO-1000 or PRO-500 model, only the rear tray can be used as the paper

source for color calibration.

3. Load the custom paper in the paper source you selected.

Important

• Do not load paper that is curled or that has already been printed on.

•

If a paper source cannot be selected, load the paper into the paper source that is displayed in

Paper Source.

Select the custom paper set on the printer control panel.

Click the OK button.

Note

•

It takes approximately 15 minutes until the calibration target is created.

The calibration target is created for the loaded custom paper.

ICC Profile sheet

If a suitable ICC profile has been provided for the custom paper to be edited, click the Browse button,

and select the ICC profile.