imagePROGRAF PRO-4000 series (PDF) User Manual (Mac)

LAN settings
Select this setting item from Device settings.
Important
• The administrator password is required to change settings if it is enabled for changing settings using
the operation panel.
• Change LAN
Enables either wireless LAN, wired LAN, or direct connection. You can also disable all.
• Wireless LAN setup
Selects the setup method for wireless LAN connection.
Note
• You can also enter this setting menu by selecting LAN settings on the HOME screen. In this case,
enable wireless LAN.
◦ Cableless setup
Select if you specify the settings of the access point information to the printer directly from a device
(e.g. smartphone, or tablet) without operating the wireless router. Follow the on-screen instructions
of the connecting device for the setup procedure.
◦ Standard setup
Select when you perform settings for wireless LAN manually using the operation panel of the printer.
◦ WPS (Push button method)
Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi
Protected Setup (WPS) push button method. Follow the on-screen instructions during setup.
◦ Other setup
■ Advanced setup
Select when you perform settings for wireless LAN manually. You can specify multiple WEP
keys.
■ WPS (PIN code method)
Select when you perform settings for wireless LAN using a wireless router supporting a Wi-Fi
Protected Setup (WPS) PIN code method. Follow the on-screen instructions during setup.
• Confirm LAN settings
The list of wireless/wired LAN settings or the direct connection of this printer is displayed on the touch
screen.
For more information on the printer's network setting is printed out:
Printing Network Settings
Important
• The network settings printout contains important information about your network. Handle it with
care.
167