imagePROGRAF PRO-4000 series (PDF) User Manual (Mac)

specified for the print
job
Roll width is the same
Select the paper roll
currently being fed
into the platen *1
*1 In the following cases, neither roll 1 nor roll 2 are being fed onto the platen. In such cases, paper roll 1 is
selected.
• When the printer has switched to sleep mode and has returned to the initial position
• When the printer has been turned on
• When cut paper has been fed into the printer and has exited it
If the Detect paper setting mismatch setting is set on Display warning or Do not detect
Condition Situation Judgment result
Condition 1
Whether the paper roll loaded on the
printer is long enough to print the paper
size specified for the print job.
Only one of either paper roll 1 or
paper roll 2 is long enough
Select the paper roll
of sufficient length
Neither paper roll 1 nor paper roll 2
are long enough
Error
Both paper roll 1 and paper roll 2
are long enough
To Condition 2
On the Printer's menu, Manage
remaining roll amount is set on
Disable (length of the paper roll
cannot be determined)
Condition 2
Whether the paper roll loaded on the
printer matches the paper type specified
for the print job.
Only one of either paper roll 1 or
paper roll 2 matches the paper
type
Select the paper roll
matching the paper
type
Neither roll 1 nor roll 2 match the
paper type
To Condition 3
Both paper roll 1 and paper roll 2
match the paper type
Condition 3
In the Printer menu, how has the Roll
paper auto switching setting changed?
It has changed to Do not identify
size
Select the paper roll
currently being fed
into the platen *1
It has changed to Identify size To Condition 4
Condition 4
If borderless printing has been indicated
for the print job (if it has not, on to
condition 5)
Only one of either paper roll 1 or
paper roll 2 is compatible with
borderless printing
Select the paper roll
compatible with
borderless printing
429