imagePROGRAF PRO-4000 series (PDF) User Manual (Mac)

1022
Cause
Received a print job that is longer than the paper length remaining on Roll paper 1.
What to Do
• Continuing to print
To continue printing, tap Print with the loaded paper. on the touch screen.
However, the roll paper may run out during the print job and you may not be able to print all of the
document.
• Replacing paper
Tap Replace the paper and print on the touch screen.
Change the Paper Source in the printer driver, or replace the paper with paper of the right length for
the print job, and then try again.
If using the Media Take-up Unit, tap Cancel on the touch screen to stop printing.
Remove the printed paper from the Media Take-up Unit, replace the paper with paper of the right
length for the print job, and then try again.
Removing the Upper Roll from the Printer
Loading the Upper Roll on the Printer
Removing Printed Paper from the Roll Unit
• Stopping printing
To stop printing, tap Cancel on the touch screen or press the Stop button.
678