Online Manual Preview Guide English
Contents Using This Online Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Trademarks and Licenses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Search Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 General Notes (Preview). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using This Online Manual Symbols Used in This Document Touch-enabled Device Users (Windows) Symbols Used in This Document Warning Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or material damage caused by incorrect operation of the equipment. These must be observed for safe operation.
Trademarks and Licenses • Microsoft is a registered trademark of Microsoft Corporation. • Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries. • Internet Explorer is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.
Apache License Version 2.0, January 2004 http://www.apache.org/licenses/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor" shall mean the copyright owner or entity authorized by the copyright owner that is granting the License.
copyright license to reproduce, prepare Derivative Works of, publicly display, publicly perform, sublicense, and distribute the Work and such Derivative Works in Source or Object form. 3. Grant of Patent License.
limitation, any warranties or conditions of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A PARTICULAR PURPOSE. You are solely responsible for determining the appropriateness of using or redistributing the Work and assume any risks associated with Your exercise of permissions under this License. 8. Limitation of Liability.
* Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
This distribution may include materials developed by third parties. Sun, Sun Microsystems, the Sun logo and Solaris are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
---- Part 6: Cisco/BUPTNIC copyright notice (BSD) ----Copyright (c) 2004, Cisco, Inc and Information Network Center of Beijing University of Posts and Telecommunications. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. LEADTOOLS Copyright (C) 1991-2009 LEAD Technologies, Inc. CMap Resources ----------------------------------------------------------Copyright 1990-2009 Adobe Systems Incorporated. All rights reserved. Copyright 1990-2010 Adobe Systems Incorporated. All rights reserved.
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above c
Enter keywords in the search window and click (Search). You can search for target pages in this guide. Entry example: "(your product's model name) load paper" Search Tips You can search for target pages by entering keywords in the search window. Important • This function may not be available in some countries/regions. Note • The displayed screen may vary.
Note • The displayed screen varies depending on your product. • Searching for Application Functions Enter your application's name and a keyword for the function you want to learn about Example: When you want to learn how to print collages with My Image Garden Enter "My Image Garden collage" in the search window and perform a search • Searching for Reference Pages Enter your model name and a reference page title* * You can find reference pages more easily by entering the function name as well.
General Notes (Preview) When using Canon imagePROGRAF Preview (hereafter Preview), the following restrictions apply. Please familiarize yourself with them before using it. • Preview supports Canon IJ CUPS Printer Driver Ver. 15.0.0 or later for OS X, which supports roll paper feeding. • This guide primarily provides explanations using the screens that are displayed when you use OS X Yosemite v10.10.
The Features of Preview The main features of Preview are as follows. • While viewing this screen, you can adjust layout settings of a document created with application software. • You can not only adjust layout settings but also your changes will be instantly applied on the preview screen, and you can print the preview screen as it is seen. Note • The media type, image size, detailed media settings, and the printer settings can cause the actual print output to differ from the Preview settings.
Starting Preview Follow the procedure below to start the Preview. Open Print dialog box. 1. Open Print dialog box. From the application software's File menu, select the printer setup menu to open the Print dialog box. Note • Normally, select Print from the File menu. 2. Select starting method. Start using either of the following methods. Start by turning on Print Preview Start from PDF pop-up menu Start by turning on Print Preview 1. Set Print Preview.
Start from PDF pop-up menu 1. From PDF pop-up menu, select Canon imagePROGRAF Preview. Click the PDF pop-up menu on thePrint dialog box, and select Canon imagePROGRAF Preview from the list. Preview main window is displayed.
Important • Preview cannot be started with application software that does not allow the use of a PDF pop-up menu. • If you select a printer that does not support Preview, the following message appears. In this case, select a different printer.
Description of Preview Screen Preview Main Window Print Settings Change and Control Panel Preferences Dialog Box Zoom Dialog Box 20
Preview Main Window The Preview main window consists of a menu bar, tool bar, preview area, and print settings change and control panel. Note • You can use the View menu to show or hide the tool bar. Menu Bar Tool Bar Preview Area Print Settings Change and Control Panel Menu Bar This allows you to select menus required for operations. Tool Bar This allows you to select tool buttons required for major operations.
Enlarge Increases the zoom scaling of part of the preview in the selected window. You can also set this with Enlarge in the View menu. Reduce Decreases the zoom scaling of part of the preview in the selected window. You can also set this with Reduce in the View menu. Zoom Set the magnification for enlargement or reduction of the screen display. You can also set this with Zoom in the View menu.
Note • You can use the View menu to show or hide the ruler. Set the ruler unit in the Preferences dialog box. For more information, see "Preferences Dialog Box." Print Settings Change and Control Panel This allows you to set the print conditions and perform a print job.
For details on the Print Settings Change and Control Panel, see "Print Settings Change and Control Panel.
Print Settings Change and Control Panel This allows you to set the print conditions and perform a print job. Preview with This Roll Paper Width This lists the roll paper widths supported by the printer. It shows the layout for the selected roll paper width in the preview area. Note • You cannot select this when using cut paper. Layout Selection Select the method for rotating page. The following settings are available for Layout Selection. Setting Details No Rotation Prints without rotating.
Note • You cannot set Rotate Page 90 degrees in Layout Selection in the following cases. • When cut paper is selected in Paper Source • When Banner Printing is specified in the printer driver • When either a square size or a size that is wider than it is taller is specified when using a custom media size For details on Layout Selection, see "Printing with Selecting the Layout." Print Centered You can print on the center of the media loaded in the printer.
Preferences Dialog Box This dialog box appears when you select Preferences from the Canon imagePROGRAF Preview menu. You can set the preferences for Preview. Units Select the ruler unit.
Zoom Dialog Box This dialog box appears when you select Zoom from the View menu. You can enlarge or reduce the screen display. Scaling Set the magnification for enlargement or reduction of the screen display. Note • You can input between 10 and 400. • You can change the numbers by clicking button.
Various Preview Features Print on the Center Not Print Spaces at the Top/Bottom Printing with Selecting the Layout Display with Fitting to the Width of the Paper Display with All 29
Print on the Center You can print on the center of the media loaded in the printer. 1. Select Print Centered. Click the Print Centered check box on the Print Settings Change and Control Panel. Note • You cannot select this if Borderless Printing is set in the printer driver. 2. Click Print button. Printing on the center begins.
Not Print Spaces at the Top/Bottom You can save paper on not to feed roll paper for the empty spaces when the print data contains spaces at the top or bottom. 1. Select Roll Paper. On the Print Settings Change and Control Panel, select Roll Paper in Preview with This Roll Paper Width. 2. Select No Spaces at Top or Bottom. Click the No Spaces at Top or Bottom check box on the Print Settings Change and Control Panel. 3. Click Print button. Printing on the settings with no spaces at top or bottom begins.
Printing with Selecting the Layout You can select the page layout for printing. In Layout Selection, select No Rotation or Rotate Page 90 degrees for the layout. 1. Select layout. On the Print Settings Change and Control Panel, select the rotation direction in Layout Selection. To save paper while printing, select Rotate Page 90 degrees. 2. Click Print button. Printing on the selected layout begins. Note • You cannot set Rotate Page 90 degrees in Layout Selection in the following cases.
Display with Fitting to the Width of the Paper In the preview area, you can display to the width of the paper. 1. Select Fit to Width. Select Fit to Width from the tool bar. Alternatively, you can select Fit to Width from the View menu. Fitting to the width of the paper, it is displayed.
Display with All In the preview area, you can display all. 1. Select Fit Screen. Select Fit Screen from the tool bar. Alternatively, you can select Fit Screen from the View menu. All is displayed.
