Guide for Device Management Console (Windows)

Calibration Monitor Dialog Box
You can check the progress status of the color calibration.
Click Calibration Monitor button on Calibration sheet, Calibration Monitor or OK button on Calibration
dialog box, or select Calibration Monitor on Execute menu to display Calibration Monitor dialog box.
Important
• You cannot check the progress status for the following color calibration.
• Color calibration performed from the operation panel of a printer
• Color calibration of a printer connected via USB (except when displayed with the OK button on the
Calibration dialog box on a model that does not support roll paper)
Printer Name
The printer name appears.
Media Type
The media type appears.
Date
The date when color calibration was started appears.
Status
The progress status of color calibration appears.
Cancel Calibration button
Stops color calibration on the selected printer.
Note
• To close this dialog box, click the button or select Exit from the Calibration Monitor menu.
Color calibration cannot be canceled by closing this dialog box.
74