imagePROGRAF PRO-6000S series (PDF) User Manual (Windows)

Removing Printed Paper from the Roll Unit
Note
• By tapping the paper settings display area and then area when setting Take-up mode and setting
Wind up after cutting to Enable in advance, you can omit steps 6 and 7 below, because when the
paper is cut after printing, the next paper will be automatically taken up after that. However, be careful
when using easily damaged roll paper because the roll paper touches the roller when paper is cut.
1.
Tap paper settings display area on Home screen of touch screen.
Important
• If the Home screen does not appear, tap the Home button.
2.
Tap area.
3. Tap Feed/cut.
4. Tap Advance or Rewind to advance roll paper a little.
With the winding direction set to outward winding, advance the length of one circumference of the roll or
more to protect the print side.
5. Tap Cut paper.
126