imagePROGRAF PRO-6000S series (PDF) User Manual (Windows)

Protocol Setting Protocol setting information -
Printer Name Printer name XXXXXXXX (up to 16 characters)
Use LPR Use LPR On/Off
Printer Location Printer location XXXXXXXX (up to 16 characters)
Use Wired Power Save Discontinuous reception (Wired LAN) On/Off
Use Wireless Power Save Discontinuous reception (Wireless
LAN)
On/Off
Use RAW Use RAW On/Off
Use LLMNR Use LLMNR On/Off
Use Spanning Tree Use spanning tree On/Off
WSD Setting WSD setting information -
Use WSD Use WSD On/Off
WSD Timeout Timeout 1/5/10/15/20 [min]
Use WSD Push Scan Use WSD push scan On/Off
Use WSD Rx Optimization Use WSD reception optimization On/Off
SNMP Setting SNMP setting information -
Use SNMPv1 Use SNMPv1 On/Off
Use SNMPv3 Use SNMPv3 On/Off
SNMP Community Name1 SNMP community name 1 XXXXXXXX (up to 32 characters)
SNMP Community Name2 SNMP community name 2 XXXXXXXX (up to 32 characters)
SNMP Extra Access Authority SNMP extra access authority Read Only/Read Write
SNMP Access Authority1 SNMP access authority 1 Read Only/Read Write
SNMP Access Authority2 SNMP access authority 2 Read Only/Read Write
SNMPV3 Setting SNMPV3 setting information -
User1 User 1 -
User Name User name XXXXXXXX (up to 32 characters)
Use SNMPv3 Use SNMPv3 On/Off
MIB Access Restriction MIB access restriction Read Only/Read Write
Security Setting Security setting No Auth No Encrypt/Auth No En-
crypt/Auto Encrypt
235