imagePROGRAF PRO-6000S series (PDF) User Manual (Windows)

Printing performance
Print method Bubblejet
Maximum resolution 2400 dpi (horizontally) (*1) × 1200 dpi (vertically)
Print head PF-10
Number of nozzles 18432 nozzles (MBK / C / M / Y: 1536 nozzles × 2, PBK / PC / PM / GY:
1536 nozzles × 1)
*1:Prints with a minimum 1/2400 inch dot pitch between ink droplets.
Memory and hard disk
Memory 3 GB
Hard disk capacity 320 GB
Personal mail boxes (Permanent
storage area)
140 GB
Print job storage capacity Common Box 100 jobs
Personal Boxes 100 jobs
Interface
You can use both USB and LAN at the same time.
You cannot use wireless LAN and wired LAN at the same time.
USB Hi-Speed USB(*1)
USB memory USB flash drive
LAN Wired LAN IEEE802.3ab (1000BASE-T) / IEEE802.3u (100BASE-
TX) / IEEE802.3 (10BASE-T)
Wireless LAN IEEE802.11n / IEEE802.11g / IEEE802.11b (*2)
*1:To use Hi-Speed USB, your computer must support Hi-Speed USB.
Additionally, the Hi-Speed USB interface is completely backward compatible with USB 1.1, so the printer can be
connected even if the computer interface is USB 1.1.
*2:A connection can be established by configuring Standard setup, WPS (Wi-Fi Protected Setup), WCN (Windows
Connect Now), Cableless setup.
Network Specifications
Communication protocols SNMP (Canon-MIB compatible), HTTP, TCP/IP (IPv4/IPv6)
Wired LAN specifications Compliance standards IEEE802.3ab (1000BASE-T) / IEEE802.3u (100BASE-
TX) / IEEE802.3 (10BASE-T)
400