imagePROGRAF PRO-6000S series (PDF) User Manual (Windows)

Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in
borderless printing, the actual printing area corresponds to the paper size minus the space for this margin.
Note
• Printable Area: The area that can be printed.
• For borderless printing with roll paper, the margin is 0 in (0 mm).
However, depending on the paper size, minor margins may be available.
Prints without Edges Based on the Scenarios(Windows)
Prints without Edges Based on the Scenarios(Mac OS)
• Recommended Print Area: We recommend printing within this area.
• To match the document size with the actual printing area, print on oversize paper with the required
margin added.
Printing to Oversized Paper Sizes(Windows)
Printing to Oversized Paper Sizes(Mac OS)
Margins of Printable Area Margins of Recommended Print Area
Top Edge Bottom Edge Sides Top Edge Bottom Edge Sides
Sheets 0.2 in (3 mm) 0.8 in (20 mm) 0.2 in (3 mm) 0.8 in (20 mm) 0.8 in (20 mm) 0.2 in (3 mm)
Rolls 0.2 in (3 mm) 0.2 in (3 mm) 0.2 in (3 mm) 0.8 in (20 mm) 0.2 in (3 mm) 0.2 in (3 mm)
Sheets
A.
Top Edge
B.
Bottom Edge
C.
Left Edge
D.
Right Edge
•
Printable Area:
A margin of 0.2 in (3 mm) on top, 0.8 in (20 mm) on bottom, and 0.2 in (3 mm) on left and right sides
is required.
•
Recommended Print Area:
404