imagePROGRAF PRO-6000S series (PDF) User Manual (Windows)

11. Complete the setup
Click OK.
When you print, the paper source is switched automatically to roll paper.
Important
• This method switches the upper and lower levels depending on the paper size specified in the print
job. Always load the same media type for the roll papers in the upper and lower levels of the
printer.
If different types of paper are loaded, an error could occur and you may not be able to print the
document as intended.
• If roll papers of the same width and type are loaded in the upper and lower levels and the
Automatically switch paper sources (paper size priority) check box is selected on the Device
Settings tab, Roll 1 (upper level roll paper) will always be used for printing. If roll papers of the
same width and type are loaded in the upper and lower levels and you want to automatically switch
the roll papers, clear the Automatically switch paper sources (paper size priority) check box.
Note
• If Roll 1 and Roll 2 produce the same margins, Roll 1 is used for printing.
465