imagePROGRAF PRO-6000S series (PDF) User Manual (Windows)

within the width of either paper
roll 1 or paper roll 2
The width of the paper size speci-
fied for the print job fits within the
width of both paper roll 1 and pa-
per roll 2
To Condition 7
Condi-
tion 7
Is the width of paper roll 1 different from the
width of paper roll 2?
Roll width is different
Select the paper
roll whose width is
closer to the width
specified for the
print job
Roll width is the same
Select the paper
roll currently being
fed into the platen
*1
*1 In the following cases, neither roll 1 nor roll 2 are being fed onto the platen. In such cases, paper roll 1 is
selected.
• When the printer has switched to sleep mode and has returned to the initial position
• When the printer has been turned on
• When cut paper has been fed into the printer and has exited it
If the Detect paper setting mismatch setting is set on Display warning or Do not detect
Condition Situation Judgment result
Condi-
tion 1
Whether the paper roll loaded on the printer is
long enough to print the paper size specified for
the print job.
Only one of either paper roll 1 or
paper roll 2 is long enough
Select the paper
roll of sufficient
length
Neither paper roll 1 nor paper roll
2 are long enough
Error
Both paper roll 1 and paper roll 2
are long enough
To Condition 2
On the Printer's menu, Manage
remaining roll amount is set on
Disable (length of the paper roll
cannot be determined)
Condi-
tion 2
Whether the paper roll loaded on the printer
matches the paper type specified for the print
job.
Only one of either paper roll 1 or
paper roll 2 matches the paper
type
Select the paper
roll matching the
paper type
Neither roll 1 nor roll 2 match the
paper type
To Condition 3
468