imagePROGRAF PRO-6000S series (PDF) User Manual (Windows)

30sec. / 1min. / 3min. / 5min. /
10min. / 30min. / 60min.
Page will be output after set amount of time has passed after
printing.
Between Scans
The wait time until printing next line can be set after printing one line in page. Set in the event
smudging occurs in the page, unevenness occurs in borderless printing, etc., and you would like
to avoid this smudging and unevenness.
Setting Items Content
Printer Default Settings in printer unit control panel are applied.
None Next line will be print immediately after first line is print.
1sec. / 3sec. / 5sec. /
7sec. / 9sec.
Next line will be print after the set amount of time has passed after printing
one line.
* If smudges and/or unevenness occur, please increase time.
Roll Paper Safety Margin
In order for heavily curling paper to absorb well in platen, length of margin established on edge of
paper can be selected.
Leading Edge Margin
Roll Leading Edge Margin length can be set.
Setting Items Content
Printer Default Settings in printer unit control panel are applied.
3mm
Will be print in standard size.
* Please select when there are no particular problems with printing.
20mm
Please select when rubbing of the print heads occurs, such as when heavily curling
paper is being used.
Cut Speed
Select auto-cut speed. This can be adjusted when paper cannot be cut precisely with auto-cut.
Setting Items Content
Printer Default Settings in printer unit control panel are applied.
Fast Select when cut is not smooth with Standard settings.
Standard Select when there are no particular problems with auto-cut.
Slow
If this is selected for paper with adhesive, the cutter will not stick to the adhesive easily and
it will slow deterioration of the cutter's capabilities.
599