imagePROGRAF PRO-6000S series (PDF) User Manual (Windows)

Note
•
To automatically check for nozzle blockages after printing, set Auto nozzle check in the touch screen
menu to a setting other than Disable.
To show warnings based on nozzle check results, set Nozzle check error display in the touch screen
menu to Enable.
However, printing may be stopped by warnings if this setting is set to Enable.
Menu Structure
Check 7
Low Print Quality setting causing lines in the printing
Follow the steps below to set Print Quality to Highest or High, and then print.
•
Windows
Change the Print Quality settings in the printer driver Advanced Settings.
Changing the Print Quality and Correcting Image Data (Windows)
•
Mac OS
Change the Print Quality in the printer driver Quality & Media settings.
Changing the Print Quality and Correcting Image Data (Mac OS)
When Fast or Standard is selected, the printing time is shorter and less ink is used than with Highest or High,
but the print quality is reduced.
Check 8
Is the media type specified in the printer driver the same as the media type loaded in the
printer?
Load paper of the same type as you have specified in the printer driver.
Loading the Upper Roll on the Printer
Loading the Lower Roll on the Roll Unit
Loading Sheets in the Printer
Follow the steps below to change the printer driver settings.
1.
To stop printing, press the Stop button.
2. Change the type of paper in the printer driver and try printing again.
727