imagePROGRAF PRO-6000S series (PDF) User Manual (Windows)

Reducing Dust from Cutting Rolls
If the paper tends to generate dust when cut, such as with Backlit Film, you can reduce flying dust by setting
Cut-dust reduction to ON from the touch screen menu, which will coat the leading and trailing edges of the
printed document with ink. As a result, you can reduce problems with the print head. You can set Cut-dust
reduction according to the media type.
Important
• Do not set Cut-dust reduction to ON for paper that wrinkles easily, such as Plain Paper or lightweight
paper. If not cut properly, the paper may jam.
• Borderless printing is not available when Cut-dust reduction is set to ON. When performing borderless
printing, set Cut-dust reduction to OFF.
Follow these steps to set Cut-dust reduction to ON.
1.
Tap paper settings display area on Home screen of touch screen.
Note
•
If the Home screen does not appear, tap the Home button.
2. Tap or area.
3. Tap Paper settings.
4. Tap Advanced.
5. Tap Cut-dust reduction.
89