Manual

10. Once paper feeding starts, you will need to do the following, based on the Manage
remaining roll amount setting and the barcode printed on rolls. (See "Keeping Track of
the Amount of Roll Paper Left.")
Manage re-
maining roll
amount
Barcodes Printer Operation After the Paper is Fed
Disable Printed A menu for selecting the media type appears on the touch
screen.
Tap media type loaded.
Not printed
Enable Printed The type and amount of paper left is automatically detected
based on the barcode printed on the roll.
There is no need to specify the type and length of the paper.
Not printed A menu for selecting the media type and length appears on the
touch screen.
After tapping the media type loaded, enter the length of the pa-
per loaded on the touch screen.
Important
• Cut the edge of the roll using the Cut paper function if the edge is creased or soiled. (See
"
Specifying the Cutting Method for Rolls.")
• When selecting the media type on the touch screen, make sure the media type set in the printer
driver and the media type loaded on the printer match.
Note
• For details on media types that you can select, see "Paper Information List."
• Adjusting the printhead alignment with the type of paper to be used in printing may enhance
printing quality. (See "Automatic Adjustment to Straighten Lines and Colors.")
63