Operation Guide

Fax (imageRUNNER 1025iF Only)
5-31
2-Sided Originals
2-Sided Originals
You can set the machine to automatically turn over two-sided originals that are placed in
the ADF, and scan each side separately.
1
Place your originals.
2
Press [SEND].
3
Press [ ] or [ ] to select the sending
method, then press [OK].
FAX
SELECT SEND METHOD
If you are specifying the destination registered in
one-touch keys or coded dial codes, you can
skip this step.
4
Specify the destination.
=012XXXXXXX
FAX NUMBER
Ex.
For instructions on specifying destinations, see
“Specifying Destinations,” on p. 5-21.
5
Press [2-sided].
6
Press [ ] or [ ] to adjust the binding
type, then press [OK].
BOOK TYPE
TWO-SIDED
<BOOK TYPE>: The front and back sides of the
document have the same top-bottom
orientation.
<CALENDAR TYPE>: The front and back sides of
the document have opposite top-bottom
orientations.
7
Press [Start].
If the <ORIGINAL SIZE> message appears, press
[
] or [ ] to select the original size, then
press
[Start] for each original. When scanning
is complete, press [OK] to start sending.