Operation Guide

Fax (imageRUNNER 1025iF Only)
5-56
Adjusting the Auto Switch Time
Adjusting the Auto Switch Time
This function enables you to set the machine to switch to document receive mode after
ringing for a speci ed length of time in the <FaxTel> mode.
This function is only available when the <RX MODE> is set to <FaxTel>.
1
Press [Additional Functions].
2
Press [ ] or [ ] to select <TX/RX
SETTINGS>, then press [OK].
3.TX/RX SETTINGS
ADD. FUNCTIONS
3
Press [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
2.FAX SETTINGS
TX/RX SETTINGS
4
Press [ ] or [ ] to select <RX
SETTINGS>, then press [OK].
3.RX SETTINGS
FAX SETTINGS
5
Press [ ] or [ ] to select <FAX/TEL
OPT. SET>, then press [OK].
3.FAX/TEL OPT. SET
RX SETTINGS
6
Con rm that <RING START TIME> is
displayed, then press [OK].
1.RING START TIME
FAX/TEL OPT. SET
7
Specify the period of time (0 to 30
seconds) before the machine starts
ringing after receiving a voice call using
[ ] or [ ], or – [numeric keys],
then press [OK].
6SEC
RING START TIME
If the machine receives a fax, the machine does
not ring and switches to the receive mode
automatically.
8
Con rm that <F/T RING TIME> is
displayed, then press [OK].
2.F/T RING TIME
FAX/TEL OPT. SET
9
Press [ ] or [ ] to select the duration
(15 to 300 seconds) for the phone to ring,
then press [OK].
15SEC
F/T RING TIME
10
10
Con rm that <F/T SWITCH ACTION> is
displayed, then press [OK].
3.F/T SWITCH ACTION
FAX/TEL OPT. SET