Operation Guide

11-17
System Manager Settings
Managing ID Cards (Optional Equipment)
Managing ID Cards (Optional Equipment)
If the optional Card Reader-E1 is attached to the machine, you must insert a control card to
operate it. The optional Card Reader-E1 performs Department ID Management
automatically.
With the optional Card Reader-E1, the following settings can be speci ed:
Changing the Password and Page Limit (See p. 11-10)
Checking Counter Information (See p. 11-13)
Clearing Page Totals (See p. 11-14)
Printing Counter Information (See p. 11-14)
Accepting Print Jobs with Unknown IDs (See p. 11-15)
If the standby display does not appear when the control card is inserted, make sure that:
The control card is inserted in the correct direction.
The control card is inserted as far as it can go.
An usable control card is inserted correctly. (You can not use the cards which are damaged or cards prohibited from
use.)
Procedure before Using the Machine
Procedure before Using the Machine
–
•
•
•
•
•
–
•
•
•
1
Insert the control card into the ard slot,
making sure that it is facing in the correct
direction.
The standby display appears.