Operation Guide

12-6
Maintenance
Cleaning the Machine
1
Turn OFF the main power switch and
disconnect the power cord.
2
Open the ADF cover.
3
Clean the rollers and rubber parts (A)
inside the ADF cover with a cloth
dampened with water. Then wipe the
area with a soft, dry cloth.
Do not dampen the cloth too much, as this may
tear the document or damage the machine.
4
Lift the document feeder tray.
5
Clean the rollers (B) below the document
feeder tray with a cloth dampened with
water. Then wipe the area with a soft, dry
cloth.
6
Lower the document feeder tray.
Be careful not to get your  ngers caught.
Cleaning the ADF
If your documents have black streaks or appear dirty after copying them using the ADF, this may be caused by
pencil lead rubbing o the documents and onto the roller. Clean the ADF scanning area,  lm, and roller.
●