Operation Guide

14-12
Machine Settings
Settings Menu
Setting Item Description Applicable Page
4. DRPD:SELECT FAX Selects the ring pattern for fax calls.
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
NORMAL RING
–
–
–
–
–
p. 5-10
5. INCOMING RING Sets whether the external telephone rings when the machine
receives a voice call or fax, enabling you to answer the voice
call. This function is only available when the <RX MODE> is set
to <FaxOnly> or <FaxTel>.
p. 5-58
OFF The telephone does not ring when the machine receives
a voice call or fax. (In the Sleep mode, the telephone may
ring one or two times, if <ENERGY IN SLEEP> in <COMMON
SETTINGS> is set to <LOW>.)
ON The telephone rings when the machine receives a voice call or
fax if an external telephone is connected.
RING COUNT Sets the number of incoming rings before the machine
answers. (1TIMES–99TIMES)
6. REMOTE RX Sets whether to use remote receiving. p. 5-59
ON The machine enables remote receiving.
REMOTE RX ID You can dial a code on remote extension to start receiving a
document.
A combination of two characters using 0 to 9, * and # is
possible.
OFF The machine disables remote receiving.
7. MANUAL/AUTO Sets whether the machine switches to the document receive
mode after the external telephone rings for a specified length
of time in the manual receive mode.
OFF The external telephone keeps ringing until someone answers
the call manually.
ON The machine switches to the document receive mode after the
external telephone rings for a specified time.
F/T RING TIME Sets the length of time to elapse before the machine switches
to document receiving. (1SEC–99SEC)
*
1
Only for the imageRUNNER 1025iF.